[ Chinese wardrobe net ] The quality of the board directly affects the quality of the overall wardrobe , because it is the main component of the overall wardrobe . According to the material classification, the plates can be divided into two categories: solid wood panels and wood-based panels. At present, in addition to the use of solid wood panels for floors and door fans, the panels we use are generally artificially machined panels, although some furniture will also use solid wood. The wardrobe panels on the market mainly use wood-based panels, while the use of solid wood is rare. The wood-based panels are further divided into plywood (plywood, large core board), particle board (particle board), fiberboard (density board), blockboard (large core board); according to the molding classification can be divided into: solid board, plywood, decorative panel, Fire boards and more.

Currently, the panels used in the wardrobes on the market are mainly particleboard and MDF.

Let's take a closer look at the characteristics and practicality of these panels.

Common plate classification

First, the solid wood board

As the name suggests, solid wood panels are wood panels made from complete wood. These plates are sturdy and durable, and the texture is natural. However, due to the high cost of such panels and the high construction process requirements, there are not many uses in the decoration. Solid wood boards are generally classified according to the physical name of the board, and there is no uniform standard specification. There are also solid wood wardrobes for high-end consumer groups in the wardrobe products.

One question, two, three, four, four, experts, teach you to choose solid wood, first, seriously ask whether the wardrobe is "all solid wood", where the MDF is used; secondly, look at the pattern of the main material surface of the cabinet door, side panels, etc. Correspondence, if necessary, deduct a button to see if the surface is pasted. Knocking a few times on the wooden surface, the solid wood pieces give a crisper sound, while the wood-based panels sound low. The last and most important thing is to smell the wardrobe. Most wood has the aroma of tree species, pine has a rosin taste, cedar has a light fragrance, and eucalyptus has a distinct eucalyptus taste... but fiberboard and MDF have a strong pungent odor, especially at the door or Inside the drawer, the two are easier to distinguish.

Second, the wood-based board

1, MDF

The MDF is made of plant wood fiber as the main raw material, and is processed by hot grinding, paving, hot pressing and the like. The utility model has the advantages of uniform internal structure, good machining performance, high bearing capacity, easy carving and various parts and shapes. MDF (450-780) generally has a good surface flatness, so when the surface needs to be boring and forming, and the pasting surface is a softer material (such as a blister board), the MDF is used to ensure the film is covered. flat surface. Therefore, it is generally used for laminate flooring, door panels, and the like.

2, particle board (solid wood particle board)

The particleboard is broken by logs and processed by high temperature and high pressure. The middle layer of the particleboard is wood chips, and the two sides are finely organized wood chips, which are pressed into plates. The surface layer is a powder layered Tianlong Ba Bu, the homogeneous particle board is the best, the particle board has a tight molecular structure and high bending strength. The particle board has the advantages of being not easily deformed and having strong nail holding power. The disadvantage of particleboard is that it is not easy to do bending treatment or curved section treatment, which requires high processing machinery and poor bearing capacity.

3, plywood (plywood, thin core board)

The splint, also known as plywood, is commonly known as a thin core board. A three-layer or three-layer thin sheet made by cutting a log into a veneer or a wood chip, and then cutting it into a thin wood and then bonding it with an adhesive. An odd number of veneers are usually used, and the fiber directions of adjacent layer veneers are vertically aligned and glued to each other. The splint is generally divided into three specifications of 3 PCT, 5 PCT, 9 PCT, 12 PCT, 15 PCT and 18 PCT (1 PCT is 1 mm). Uses: Each layer of plywood is glued together, so its environmental protection is relatively poor. It is not recommended to use it in home decoration. If it is said that it is suitable for making Sohu.com, it is most suitable for making the package.

Kitchenware & Tableware

Kitchenware & Tableware,Custom Made Placemats,Coaster With Cork Bottom,Coasters With Logo

Ningbo DSS Intelligent Technology Co., Ltd , https://www.dsscosmetics.com