What is the difference between a water slide and a normal slide? How to maintain your water park slide?
Applicable occasions: mostly used in outdoor parks, naughty castles and other land children's parks Applicable occasions: mostly used in outdoor parks, shopping malls and other places Applicable occasions: special climate zones such as water parks, hot springs, and seaside On the other hand, the inner surface of the slide of the water slide is not allowed to have problems such as small holes, wrinkles, bubbles, poor curing, poor immersion, cracks, defects, etc.; the back surface is not allowed to have problems such as poor curing, poor immersion, defects, burrs, etc.; Layering, glitch, etc. are not allowed. In addition, it should be noted that when the water park equipment is visually observed at a distance of 600 mm, problems such as repair marks, scratches, uneven colors, cloth lines, unevenness, and collection are not apparent. Guide to the maintenance and repair of FRP slides <br> Maintenance: 2. Crack: Grind the crack first with an angle grinder, clean the polished surface (with a brush or cotton cloth) before repairing, and then repair with the same color gel coat. After curing, use 400# water sandpaper first. Rough grinding, then 800# water sandpaper for semi-finishing, and finally 1500# water sandpaper for fine grinding, in order to achieve a smooth, smooth surface of the slide, and finally polished with a polishing machine (with 3 # polishing liquid). Blue tide amusement has a strong quality inspection team, and keeps up from the beginning to the end in production management. Production managers, supervisors, squad leaders, quality managers and craftsmen always pay attention to the entire production process, and all processes are operated according to standard process instructions, reducing the possibility of product quality problems. Ji'An ZhongXiang Natural Plants Co.,Ltd. , https://www.jxzxessentialoils.com
Material: LLDPE engineering plastic
Advantages: light weight, bright colors, different shapes, lower cost
Disadvantages: anti-ultraviolet performance to be improved, easy to aging leg color, poor weather resistance
Stainless steel slide
Material: 304 stainless steel,
Advantages: strong plasticity and smooth surface
Disadvantages: single color, painted with paint, short service life, lack of corrosion resistance.
Water slide
Material: FRP
Advantages: rich in color, high strength, good corrosion resistance, service life can generally be more than 10 years
Disadvantages: complicated process, high material requirements and high cost
Different places, you need to choose different slide products, outdoor parks, naughty castles, shopping malls and other places, you can choose plastic slides and stainless steel slides.
Water parks, hot springs, seaside and other places have higher requirements for water quality. (falling pool) swimming pool needs to add chemicals such as disinfectant to ensure clean water, PH value is within the qualified range, hot spring water contains sulfide, seaside and other places, the air contains high salt, so the water slide is generally made of glass fiber reinforced plastic. Externally applied gel coat, rich in color, high strength, good plasticity, good corrosion resistance, high height and shape according to terrain design, such as straight, curved, spiral, water slide The main part of the water park equipment.
Raw materials for water slides
Water slides generally use composite materials. The so-called composite material refers to a new type of material in which a series of chemical raw materials such as glass fiber and resin are combined.
A single type of glass fiber, although high in strength, is loose between fibers, can only accept tensile force, can not accept tortuosity, shear and compressive stress, and is not easy to make a fixed base shape, and is a soft body. However, if they are bonded together by synthetic resin, they can be made into a variety of solid articles having a fixed property, which can withstand tensile stress and to accept tortuosity, shrinkage and shear stress. This constitutes a glass fiber reinforced composite.
Its strength is equivalent to steel, but also rich in glass components, with glass-like color, shape, corrosion resistance, electrical insulation, heat insulation and other functions, commonly known as "glass reinforced plastic."
National standard requirements for the production of water slides for water park equipment manufacturers
In water park equipment, water slides are usually made of FRP and are required to comply with relevant national standards.
On the one hand, the surface of the water slide should be smooth and crack-free, with uniform color tone. The FRP used should meet at least three requirements: the resin should have good water resistance and aging resistance; the glass fiber should be made of alkali-free glass fiber, and the fiber surface should have Good wettability; thickness should not be less than 6mm, flange thickness should not be less than 9mm.
1. Before the daily opening, the slides should be inspected to see if the slides have exposed sharp edges, sharp corners, burrs, water leaks, etc.
2. Whether the water treatment equipment is operating normally to ensure the supply of water for the lubrication water of the slide and the falling pool of the slide.
3. Check and fasten the connectors regularly.
4. The load-bearing members should be inspected regularly to see if the structure has cracks and bending deformation. In order to replace it in time.
5. Slides should be covered with plastic cloth or coarse cloth during non-use to prevent aging, fading, cracks, etc. caused by ultraviolet radiation. The cracked slot section should be replaced (or repaired) in time. If the slide interface is not flat, inverted boss or cracked, it should be treated in time.
6. The surface paint layer of the metal component should be checked for detachment or fading during non-use. If there is peeling or peeling, it should be replenished.
7. Regularly organize safety inspection and maintenance, and find that there are water, sand and gravel on the slide surface, and should be cleaned and polished with cotton cloth or sandpaper in time.
service:
1. Leakage of slide: Connect the glass glue to aging, first remove the old glue, clean it up, re-polish the glass seal, wipe it with your hands, scrape the residual glass glue, and dry it with water sandpaper for surface grinding.
1. Regularly train employees' operational skills to ensure the execution of the process and ensure that the products operate according to standard procedures.
2. Ensure the quality of raw materials, select suppliers strictly, and ensure the quality of each batch of raw materials is reliable.
3. Ensure a good production environment, especially in the gel coat and paste workshop. Temperature, humidity and hygiene in the workshop will have a certain impact on the quality of the product. Shepherd Waterworks has invested a large amount of money to establish a closed workshop to reduce the waste gas and dust during the production of FRP. It is collected by vacuum and then treated by the washing tower to achieve the environmentally-friendly combined discharge, creating a good environment for mass production and improving Production capacity lays a solid foundation.
On the other hand, strictly control the quality, unqualified products will never be shipped, weekly quality assurance meetings, summarize the problems that need to be paid attention to during the production process this week, continuously improve and optimize the products, and ensure that each batch of goods is quality-based. The amount is completed.