Display status settings

Most of the commands in the "Display" menu are used to set the display status during typesetting. For example: whether to display the ruler, scroll bar, tool bar, status line, etc. in the Feiteng window.

1. The parameter setting in the "Display Scale" option.

The "Display Ratio" option in the "Display" menu has a submenu that lists four display ratios: "Actual Size", "Full Page Display", "Default Size", and "Custom Display Ratio". "Actual size" shows the display ratio is 1: 1; "Full page display" is to change the display ratio according to the size of the file page, so that the entire page is displayed in the window, mainly used to observe the layout of large pages; "default size" is Display according to the scale value in the "Default display scale" option under the "Layout settings" option in the "Environmental settings" dialog box; "Custom display scale" means that you can set the display scale from the "Value setting" option , Its value range is 20% to 800%. In addition, the display ratio of the current file can be changed by using the magnifying glass tool; the display ratio of the current file can also be changed by mouse operation, for example, using "Ctrl + left mouse button" can make the display ratio "default size" and "full page display" To switch between, use "Shift + left mouse button" to switch the display ratio between "default size" and "200%". The use of the "display ratio" option in the typesetting of newspapers can greatly facilitate the typesetting and modification of text parts. The full-page display can view the graphic layout of the entire newspaper completely, and the partially enlarged display can easily typeset or modify the graphic of a certain part of the newspaper.

2. Parameter setting in "Ruler" option.

By selecting the "Ruler" option in the "Display" menu, the vertical ruler and the horizontal ruler can be displayed on the upper and left sides of the Feiteng typesetting window, respectively. The ruler acts as a coordinate and is used to locate objects. Drag the intersection of two rulers to change the origin of ruler coordinates. The scale on the ruler is determined by the "Coordinate Unit" option in the "Length Unit" option.

3. Parameter setting in "Toolbar" option.

Many operation tools are provided in Feiteng typesetting software, some are used for arranging tables, some are used for arranging mathematical formulas, some are used for arranging text, some are used for primitive typesetting, some are used for basic operations, and so on. In the "Toolbar" option, the use of some tools will reduce the operation, such as adding emphasis, block-level adjustments, click on the tool, you do not have to look for commands from the menu layer by layer; some operations must use the tool to To complete, the picture element must use the element tool, the block alignment operation must pass the block alignment tool, and the mathematical formula must use the math tool.

By running the "Toolbar" command in the "Display" menu, a "Display Tool" dialog box will pop up, in which you can select the type of tool to be displayed on the screen, which has three page options, each page option The tools listed are different, the ones selected are indicated by a check mark in front of the name. Different tools should be used when editing different objects. The tool will be recessed after being selected, and the mouse pointer will change accordingly>, then the corresponding editing operation can be performed.

In the "Show Toolbar" dialog box, there are three options: "Layout Tool", "Main Window Tool" and "Math Tool".

The "Typesetting Tool" option is mainly used to select whether the "Common Toolbar", "Text Attribute Tool", "Block Alignment", and "Toolbox" are displayed on the screen. The tools in "Common Toolbar" are: "New", "Open", "Save File", "Layout", "Arrange Image", "Print", "Send Arrangement", "Crop", " "Copy", "Paste", "Restore", "Repeat", "Display Ratio", "Display Text Block Border", "Display Background Grid", "Fixed Tip Line", "Layout Direction", "Level Flip", " "Block merge / separation", "table", "math" etc. "Text Attribute Tool" is mainly used for text editing. The tools are: "Font", "Font Size", "Bold", "Italic", "Underline", "Overline", "Midline" "," Focus on the key "," Focus on the key "," Superscript word "," Subscript word "," Add Tong Shading "," Delete annotation "," Overlap "," Vertical middle horizontal ", "Large paragraph head", "Left alignment", "Center", "Right alignment", "Support full" and so on. The operation of "block alignment" can only be completed by the block alignment tool. "Toolbox" includes the most commonly used arrow tools, text tools and primitive tools.

There is a "Common Toolbar" option in the "Main Window Tools" option, which includes several common tools such as "New", "Open", "Send Arrangement &", etc. These tools are only open when there is no file in the Feiteng layout window Before showing.

There are two options in the "Mathematical Tools" option: "Common Toolbar" and "Mathematics". The "Mathematical Tools" contains tools for arranging various mathematical formulas.

In addition to some of the more frequently used commands in the "Display" menu, it also includes: "Scroll bar", "Status bar", "Scene grid", "Cue line", "Display text block border", "Figure Don't show "," partial display "," do not show S2 files "," show homepage "and" show page number "commands, these commands generally do not need too much settings or can be used directly without setting.

Wooden Tip

Wooden Tip,Wooden Filter Tips,Rolling Wood Filter Tips,Cigarette Wood Filter Tips

NANTONG OUFEIYA IMP& EXP CO.,LTD , https://www.jsnantongoufeiya.com