Leather, durable, and tough. It can bring us classic and permanent potential hints, and can also go to tasting, touch, and bring us a strong sense of existence. Therefore, there are not many leather items in the house, but at least there are a few classic pieces, which are collected and slowly spread. Identification of leather Furniture The identification of leather furniture is mainly to identify the true and false of the cortex and the advantages and disadvantages. The conventional simple identification methods are usually touch, watch, smell and so on.
Identification of leather furniture
The identification of leather furniture is mainly to identify the true and false of the cortex and the advantages and disadvantages. The conventional simple identification methods are usually touch, watch, smell and so on.
First, the touch of the surface of the leather by hand feels smooth (except for the grain processed into thick skin), soft, full and elastic feeling is the leather.
Second, the eye is mainly used to identify the type of skin and the quality of the leather grain. Observing the surface of the dermis has obvious pores and patterns, while the synthetic leather, although it also resembles pores, is not realistic and unclear.
In addition, the reverse side of the synthetic leather has a layer of textile as the bottom plate. This textile bottom plate is used to increase its tensile strength, and the reverse side of the leather does not have this layer of textile. This identification is the simplest and most practical method.
Third, the smell of good quality skin generally does not have any odor, all leather has a leather smell, if there is a pungent odor may be poorly processed in the leather process or a certain chemical raw materials used excessive standards.
4. The scent after ignition of the ignited leather is similar to that of the ignited hair, and it is not crusted after burning, and can be powdered by fingers; the artificial leather emits a pungent odor after being ignited, and is burned to form a sputum.
Maintenance and cleaning of leather furniture
In order to ensure the quality of leather furniture, daily attention should be paid to:
First of all, to ventilate the room, too dry or wet will accelerate aging.
Secondly, do not place the sofa in a place exposed to direct sunlight, or in a place where the air conditioner is directly blown.
Again, when wiping the sofa, it is not possible to use an alkaline cleaning solution, which will reduce the flexibility of the leather and cause wrinkles.
The most feared thing about leather furniture is that it is stained with oil or scratched. Do not use water directly when cleaning. Use a dry cloth and a special leather cleaner to gently wipe it.
For families with pets or children, be especially careful with kittens, puppy paws or small children scratching the furniture surface with sharp objects.
The most important thing for the maintenance of leather sofas is the breathing of the leather. Therefore, it should be cleaned regularly to keep the pores on the surface of the leather from being blocked by dust. When scrubbing, you can wipe it with cotton cloth or silk and wipe it gently. After wiping, you can also use Bi. Lizhu or glazing wax will be sprayed again to keep it clean.
If you accidentally contaminate the oil stains, use a cotton cloth, a towel, a moderate amount of neutral soapy water, and then dry with a dry cotton cloth. Do not scrub directly with water.
After cleaning, the leather sofa can be sprayed with a special leather cleaner, and repeatedly rubbed with silk to prevent cortical aging.
What you need to know about cowhide
Shaved cowhide characteristics:
Also known as "Glossy Cowhide", the characteristics of the cowhide are small pores, even distribution, and full leather surface. The leather board is stronger than other skins, and the touch is firm and elastic. If you squeeze the leather surface hard, there are small folds. The market is also called matte, glossy cowhide. The characteristics are flat and smooth surface without pores and skin texture. In the production, the surface grain surface is slightly polished, and a layer of colored resin is sprayed on the leather to cover the surface of the leather, and then sprayed with water-based resin, so it is a high-grade leather. . Especially the bright leather, its bright and dazzling, noble and gorgeous style, is the popular leather of fashion leather goods.
Special effect cowhide characteristics:
The production process requires the same repair of the cowhide leather, but the pearl resin, metal aluminum or metal copper element is added to the colored resin for comprehensive spraying, and then a layer of water-based light-permeable resin is rolled. The finished product has various luster, bright and dazzling, elegant and luxurious. Currently popular leather, is a mid-range leather. Embossed cowhide characteristics: The pattern is made of a flower board (aluminum, copper) to heat the surface of the leather to make a style of leather. At present, the popular “Litchi grain cowhide†is a piece of flower with a pebbled pattern, named “Litchi grain cowhideâ€.
Two-layer cowhide features:
It is obtained by splitting the thick skin with a sheet leather machine. The top layer is used to make full grain leather or shaving leather, and the second layer is made into a two-layer leather through a series of processes such as finishing or filming. Its fastness and wear resistance are better. Poor, is the cheapest of its kind. The reverse side is the second layer of leather, which is coated with a layer of PU resin, so it is also called film cowhide. Its price is cheaper and its utilization rate is high. With the change of the process, it is also made into various grades, such as imported two-layer cowhide. Due to its unique craftsmanship, stable quality and novel varieties, it is the current high-grade leather, and its price and grade are no less than the top layer of leather.
Furniture
Furniture,Outdoor Furniture,Chair Furniture,Office Furniture
NINGBO CHEN WEI SUPPLY CHAIN MANAGEMENT CO.,LTD , https://www.chenweifurniture.com