With
the wide application of Offset
CTP technology, computer direct plate making will gradually become popular and become the mainstream plate making method. Similarly, screen printing has also been developing computer-to-plate technology. CTS-computer to screen has been developed abroad for many years, but it is still in its infancy in China. This article will briefly introduce the relevant technologies and information. one, The history of CTS development
Normal > As early as the late 1980s , the United States took the lead in introducing the CTS system. The early CTS systems were positioned in different silk screen markets, some in the silk screen market for garments, and some in the silk screen market for decorative materials. A part of the CTS system uses the laser exposure principle to combine the screen printing and exposure. The CTS system converts the text image of the layout file into a bitmap image via RIP , and then sends the bitmap image data to the system modem to control the laser exposure to form an image on the screen. By the 1990s, the CTS system of the inkjet principle appeared . It is through the injection of opaque ink in the ordinary silk screen photosensitive layer, with ink dots instead of the dots on the positive film, and then full-page exposure, developed into a silk screen.
Normal > two Basic composition and workflow of CTS system
Normal > The most important device of the CTS system is the screen image output device, so the general system name is based on the name of the output device.
Normal > (1) The composition of the CTS system is basically the same as that of the DTP system, but the output devices are quite different. Usually the CTS system consists of the following parts:
• How to solve the large-area degumming of corrugated cardboard? • Four reasons for resilience of corrugated board and how to improve it • Smarterware tracking button technology can monitor food freshness • Unprecedented seafood active packaging solution! • Smart shelf and smart packaging help Tap tags • Japan uses 3D printing to develop surface-embedded QR codes • Indonesia has successfully developed plastic waste utilization technology • New RFID tags have increased sensitivity by 30% • Promote environmentally friendly packaging film applications to reduce white pollution • South Linda Research and Development "Modified Plastic" New Biomass Material
Traditional traction ropes can control their dogs steadily, but they are too restrictive for dogs, and dogs will resist traditional traction ropes. And it is not easy to clean up, and the damage rate is high.
The Telescopic Traction Rope is more flexible than the traditional traction rope. When the pet bursts, the telescopic traction rope has one more step than the traditional traction rope, which is to lock the traction rope, and control the length of the rope body well, and have a good response. It can be stopped in time when the dog is not harmed. The rope body is retractable, and can be stored well when not in use at ordinary times, and the loss rate is low.
Automatic Telescopic Traction Rope,Pet Automatic Telescopic Traction Leash,Waterproof Dog Leash,Super Strong Traction Rope