Function of constant humidity incubator:

Using microprocessor control, with functions of monitoring, temperature control and protection. Lighting in the box: Observe the culture in the box, stainless steel liner, never corrode.

Technical parameters of constant humidity constant temperature incubator:

Features of constant humidity incubator:

1. The outer box of the equipment is cold-rolled steel plate, the surface adopts electrostatic spraying process, the inner tank is stainless steel, the insulation layer is formed of polyester foam, and the light-transmitting window uses double-layer hollow glass to ensure the insulation performance in the box (low temperature incubator) (Incubators that require stainless light, such as BOD, do not have glass windows), there are cold and hot air channels in the box body to make the gas circulation in the box smooth and the temperature more balanced.

2. The system adopts the "zero crossing" non-contact switch circuit technology, so that the pulse width modulation heating and cooling is realized, so that the temperature control fluctuation range is less than 0.5 ℃, and the internal unevenness is about 1.0 ℃.

How to use constant humidity incubator:

1. Conditions of use:

A. Ambient temperature: 10-30 ℃

B. No strong corrosive gas, good ventilation, relative humidity below 85%

C. Power supply: 220V ± 10%, 50HZ capacity is not less than 1KW, with good grounding wire.

2. How to use constant humidity incubator:

A. Before use, place the ultrasonic atomizer next to the machine, add water to the ultrasonic atomizer, connect the gasification pipeline, and plug the ultrasonic atomizer power cord into the three-wire socket on the back of the right side of the box

B. Stop humidification when the machine is heated

Notes on constant humidity incubator:

1. The use of humidifier should pay attention to add water in time, add water once every 1-2 days according to humidity requirements to prevent damage. When adding water, remove the power plug of the humidifier, remove the humidifier water storage tank, turn up counterclockwise to unscrew the water seal, after adding water, tighten the seal, put it into the humidifier, press the humidifier power can.

2. After the device is grounded, if the ground is uneven, it should be leveled.

3. The general motion of the device should move in parallel, and the tilt in any direction should be less than 45 degrees.

4. If the device is not used for a long time, the power cord should be unplugged to prevent the device from being electrified and hurting people, and it should be operated regularly (generally in the first quarter) for 2-3 days according to the usage conditions to expel the moisture of the electrical components and avoid damaging the related devices.

When the equipment is in normal operation, the contents of the box should be placed without affecting the air circulation to ensure uniform temperature in the box. The inner tank of the box wall and the surface of the equipment should be frequently wiped to keep it clean.

The constant temperature and humidity incubator is used to test various performance items of aerospace products, information electronic instruments, materials, electrical, electronic products, and various electronic components under high temperature or humid environment. Microcomputer intelligent control, liquid crystal display to control temperature, humidity, time, over temperature alarm function; the appearance is painted with matt coating to avoid light radiation, the partition can be adjusted arbitrarily, and it is also very convenient to use. Finally, I will introduce some precautions for using a constant humidity incubator. Please also users who have purchased such products, must take good care of them, and the period of use will be longer.