[ Chinese wardrobe network ] is the decoration season, more and more people buy home decoration. Spring rainy days, extremely wet and damaged. Therefore, pay attention to moisture when purchasing home improvement materials. The wardrobe is one of the most commonly used household items, with both clothing storage and bedroom decoration. Wardrobes are not fast-moving products. It is not a problem to use a good wardrobe for ten or eight years, so you should pay special attention when purchasing. How to choose a satisfactory wardrobe, and learn with Xiaobian~

Spring decoration purchase wardrobe "six look" know good or bad

1, first look at the selection of the wardrobe. Professional manufacturers use environmentally-friendly plates that meet national testing standards, and some manufacturers use inferior plates that have no test reports and pose a potential threat to human health. Therefore, to buy a wardrobe, we must first look at whether the merchant has a plate inspection report and relevant testing certificate from the national authority inspection department.

2. Look at the veneer of the plate. Some wardrobes look good on the surface. In fact, with a finger stroke, you can draw obvious scratches. These wardrobes are made of surface-coated vellum paper and ornate paper sheets that are often used in low-cost wardrobes on the market, and have poor wear resistance. Professional manufacturers use environmentally friendly melamine veneers with thicker immersion paint and high temperature and high pressure treatment. The surface strength is high, abrasion resistance and scratch resistance.

3. Look at the edge of the board. Professional manufacturers use precision panel saws to cut sheets, and there is no chipping around the sheets. After the edges are sealed, the water in the air is effectively prevented from intruding into the interior of the board. Some manufacturers have no professional equipment, rough cutting, and obvious edge collapse around them. Some even cut corners and cut only the front side of the board. The unsealed surface easily absorbs moisture from the air, causing the sheet to swell, causing the wardrobe to deform and affecting the service life.

4. Look at the processing method. Professional manufacturers use professional automatic edge banding machine, using environmentally friendly hot melt adhesive to seal the edges, and the veneer is firm. The auxiliary materials used in the production process are environmentally friendly, in order to ensure the environmental protection of the final produced wardrobe, and to ensure that there are no harmful substances. Some manufacturers, without professional processing equipment, use ordinary universal glue to manually seal the edges, easy to pull off the drum. In addition, the harmful substances such as benzene and formaldehyde contained in this rubber are seriously exceeded, posing a potential threat to human health.

5. Look at the backplane structure. Professional manufacturers use a backing plate with a thickness of 5mm or more, melamine veneer, and a trough-type reverse leather lap joint structure to prevent the back plate from directly absorbing the moisture on the wall surface. Some brands have thin back plates and are connected by nail-type back plates. The back plates are in direct contact with the wall. The moisture on the wall is easily absorbed by the plates, which is easy to get wet, moldy and deformed, and the cabinet loses its seal. Sex.

6, see if it is customized for professional home. Brand wardrobes are professionally produced. Functional parts (drawers, trousers racks, tie trays, etc.) are standard designs. The width, depth and height are standard. At the same time, in order to meet the individual needs of customers, we also provide customized quality. And in line with the concept of professional custom home.

B Ag

Cosmetic Bag,Travel Bag,Tote Bag,Shopping Bag

qiangcheng Industry and trade Co.ltd , https://www.qiangchenbag.com