After we purchase the house, we must do the decoration of the house. Only the decoration of the house will be handed over to the decoration company. Therefore, we have to do the inspection of the house. Check whether the work in the place is in place. Then, what are the precautions for the inspection of the house? What are the steps for the inspection of the house? Next, let me introduce you to the small series of the decoration home network.

First, the inspection of the house

1. When accepting a new hardcover house, the purchaser must know whether there is hot water and medium water in the house, and open the water pipes to judge whether the pipe is connected incorrectly. Check the new house at the time of acceptance about the location of the water meter, the outlet should be in the kitchen or health.

2. The circuit refers to the position and matching of the socket, the type of the wire and the capacity of the larger power consuming device. This requires the consumer to ask the property management company or developer in the community for the basic drawings of the concealed project layout of water and electricity.

3. If the error between the area of ​​the contract and the actual measured area is within 3%, it will not be considered; if the error exceeds 3%, the compensation agreement signed by both parties shall prevail. Xiaobian suggested that the error between the area of ​​the house and the actual measured area is 2%, preferably not more than 5%.

4. Check the security door several times to see if it is flexible, close the door, listen to the sound insulation effect, see if the cat's eye is smashed, the doorbell is normal, the door can be closed, the hand grabs the door frame and shakes hard, see if the door frame is Shake.

5. Most of the electric-modified lines are sealed inside the wall, so when we check the hardcover room, we can check the position and matching degree of the socket, the weak electric box of the door, the leakage protection switch and the main switch. You can also confirm the capacity of the largest power-consuming device. Regarding the type of the actual use of the wire, the wiring and other issues, the buyer needs to ask the developer for the drawings and contract provisions of the electric change route.

Second, the steps of the inspection

1. This is the first step in closing the house. Pay attention to the deadline. Generally, the time limit for the delivery of the house agreed by the developer is within 30 days of the notification, so the buyer must arrange the time.

2. After receiving the check-in notice, you should first judge whether the developer has delivered the house as scheduled. If the delivery is overdue, the handling opinion should be submitted, and according to the developer's reply, it is decided whether to go to the house and go to the house at the time agreed upon in the notice.

3, in the inspection of the house to check all aspects of the house, such as the flue in the kitchen is not open, the waterproof in the bathroom is not done, the circuit is not equal.

After the completion of the house decoration, the owner needs to check and accept. If there is a bad place, it needs to be redone. Then, what are the precautions for the house inspection and the steps of the house inspection? Through the introduction of the above series, everyone knows about it. Then if you still want to know more about decoration, please continue to pay attention to the decoration home Internet cafe.

More related wonderful reading:

What are the details of the inspection of the house? Inventory materials under the inventory

Precautions for hardcover room inspections

Secrets that are not known - home inspection precautions

What are the precautions for the inspection of hardcover rooms?

How to check the second-hand house? Second-hand house inspection considerations

Airbrush Spray Pen

Airbrush Spray Pen,Spray Art Airbrush Pen Set,Crayola Spray Pens,Airbrush Painting for Beginners,Electric Airbrush Gun

Guangdong Jishengke Industrial Co.,Ltd , https://www.dgjskpad.com