[ Chinese wardrobe net ] The finished wardrobe is bought and placed in the bedroom or the cloakroom. However, the installation of the custom closet can be much more troublesome. It needs to be tailored according to the type of your home. Today, Xiaobian will explain the detailed process of custom wardrobe installation. Speed ​​horse!

First, the preparation stage

1. Material is present

More formal furniture manufacturers, cardboard packaging is generally shipped to the site. After unpacking, check the plates and hardware.

2. Fixing screws

The nails are generally left on the plates according to the design drawings, and the workers at the site use special tools to fix the screws.

3. Measuring side panels

Since the closet is placed against the wall, the side panel is sawn off at the position of the baseboard. After you have it, look it up and see if it fits.

Second, the installation phase

1. Place the bottom plate

The floor placed on the bottom of the wardrobe should be cleaned beforehand, because it will be very troublesome to clean up after installation.

2. Fixed frame

Install the side and back panels of the closet according to the grooves on the board and adjust the position between the boards.

3. Install the top plate

It is best to prepare a climbing stool on the scene. The top plate should be lifted up and then fixed with rivets.

4. Mounting shelf

Place the shelf where you have previously screwed it and then secure it. Pay attention to the fixed position of the shelf and the back and side panels.

5. Fixed door rail

The door rails are installed on the top and bottom sides of the wardrobe. The material of the door rails is better, lighter and firmer.

6. Install the clothes rail

Fix the rivets in the reserved position and install the clothes rail. Note that the two sides should be balanced.

PE Cling Film

Pe Cling Film For Food,Pe Cling Film,Cling Film Food,Kitchen Pe Cling Film

DONGGUAN YEE HUP TRADING CO,.LTD , https://www.dgyeehupack.com