Gorgeous board production process
A. Plastic parts: Imported LLDPE
E. Outer cover: Soft Covering PVC
1.Can protect children safe when they playing indoor, and let they enjoy the play freely
2.Suitable for improving Children energy and imagination
3.Helping them grow up happily, cleverly, and healthily
We can design and produce as your requirements
Custom Design Indoor Playground Equipment Custom Design Indoor Playground Equipment, Attractive Indoor Playland, Custom Playground Equipment Liben Group Corporation , https://www.indoortrampoline.de
In this method, only one decorative impregnated paper is attached to the surface of the artificial board, and the back side is not attached or laminated with a urea-formaldehyde resin or a phenolic resin impregnated paper as needed. When a layer of impregnated paper is applied to the back surface, the stress generated in the panel due to the surface decoration can be substantially eliminated, and the sheet is prevented from being deformed.
This board has a wide range of uses due to its realistic wood grain, bright color, abrasion resistance, heat resistance, water resistance, impact resistance and chemical resistance.
All kinds of wood-based board substrates can be decorated with resin-impregnated paper veneers, but the surface of the substrate-based wood-based panels is required to be smooth, smooth, structurally symmetrical, water content meets requirements, and thickness is equal. The substrate is then sanded if necessary.
After the substrate and the impregnated paper are matched as needed, they are hot pressed in the press. The hot pressing temperature mainly depends on the temperature required for melting and solidifying the resin, but the heat resistance of the substrate artificial board is also considered. When the medium density fiberboard and particleboard are attached, the general temperature is controlled below 140 degrees Celsius. When the plywood is attached, the temperature should be operated at 135 degrees Celsius, and the hot pressing temperature should be matched with the heating time. In order to melt and solidify the resin, a short time can be used. High temperature, or long time low temperature process. Short-term high temperature, because the heat can not be transferred to the substrate, so the substrate temperature is not too high, can prevent shrinkage. The low temperature and long-term heat has enough time to transfer to the substrate, and the temperature rise is large, and the substrate is easily contracted. However, surface cracking due to insufficient curing of the resin can be prevented.
Therefore, the general veneer temperature is 135-140 degrees Celsius, the heating time is 10-15 minutes, and the unit pressure is 3.0-3.5 MPa.
Measurements (m)
can be customized
Certificate
Color
Various, according to your requirements
Materials
B. Post: National standard galvanized steel pipe
C. Metals: Galvanized
D. Deck, stair, bridge: Wood inside with sponge , rubber or powder cover
Advantage
d.Environmental protection
e.Uneasy to lose shape
Function
Installation
Professional CAD instruction, assembly procedure and project case .
Age Range
Children
Apply to
Amusement park, gymnasium, Kindergarten, Preschool, etc.
Packing
Standard export packing
Remark
